Târgu Jiu, Gorj
0768 147 919

MB-70HI

MB-70HI

In response to the growing demand for building products with high thermal insulation, for windows and doors with thermal breaks, the MB-70HI, MB-70US HI systems were developed, and for windows built into the curtain wall, the MB-70CW HI system .

In response to the growing demand for building products with high thermal insulation, for windows and doors with thermal breaks, the MB-70HI, MB-70US HI systems were developed, and for windows built into the curtain wall, the MB-70CW HI system . Their design is based on the well-known, powerful and respected MB-70, MB-70US and MB-70CW systems. The thermal insulation of this system is much higher than the thermal insulation of the base system, so for constructions using the MB-70HI system, the U-factorf is 1.0 – 2.3 W/(m2K), depending on the profiles and accessories used.

The thermal insulation of this system is much higher than the thermal insulation of the basic system, so that for constructions using the MB-70HI system, the Uf factor is 1.0 – 2.3 W/m²K, depending on the profiles and accessories used.

The increase in thermal insulation is achieved through the special insulation chamber placed in the middle, the one that joins the aluminum profiles. The insulation profile is characterized by low thermal conductivity values and reduces heat flow. The central location also limits the contributions of thermal convection and radiation.

Windows and doors in the MB-70HI system, as in the case of the basic system, can be used both in individual solutions and in aluminum facades, if the joint between the upright and the rule belongs to the system, MB-SR50N HI+ with insulation improved thermal.

Making dreams come true: Marckon and commitment to quality

With us, you will benefit from experience, professionalism and a reliable partner at every stage of the project.

Intro